ZB-90SP  Antique Brass Finish Windsor Exterior Entry Reproduction Door Plate 15 3/4" Tall

ZB-OB90SP  Oil Rubbed Bronze Finish Windsor Exterior Entry Door Plate 15 3/4" Tall

Cast in lost wax process using solid brass, darkened to look like an original patina with our antique brass finish.  Windsor was designed by the Reading Hardware Co, circa 1885.

Don't forget to order a Windsor doorknob or French lever handle.

This door plate has a cylinder lock receiver.  For a full mortise lock with doorknob function in the Windsor pattern, see ZB-9SP.  This is a door plate that can be used with our turnlatch Windsor interior door plates.

Overall Measurements:  2 1/2" wide by 15 3/4" high.

Measurement from the center of the cylinder hole to the center of the doorknob hole is 3 3/4".

ZB-90TL-Turnlatch	ZB-90KO-Knob Only	ZB-90LK-Lower Knob Only	ZB-90-With Keyhole	ZB-90DP-Push Plate

Popular locks to use with this door plate:

These are our most popular doorknobs for this door plate:

ZB-37K	ZB-38K	ZB-39K

We manufacture Victorian brass door knobs, French lever handles, Mission or craftsman copper door knobs, Art Deco design door knobs, Art Nouveau door hardware , and reproduce rare R&E door hardware and rare Windsor door hardware originally produced in the 1880's.
Where else will you find a variety of Victorian screen door hardware?

 

For every suite of doorknobs, we also sell the matching vintage door plates , and accompanying hardware such as antique door bolts, Victorian mortise locks, electric doorbells and twist doorbells . Whether you're performing a restoration or adding some personality to new construction, Vintage Hardware has the complete antique door hardware solution.

To see more ouf our vintage reproduction door knobs, click here

Uncertain of what size lock cylinder you need for your entry door? The following table should help.

Door Thickness	Part no. / Cylinder Length
1 1/4"	L-9CC: 1"
1 1/2"	L-9CC: 1"
1 5/8"	L-9CC: 1"
1 3/4"	L-9C4: 1 1/4"
2"	L-9C4: 1 1/4"
2 1/8"	L-150S: 1 1/2"
2 1/4"	L-150S: 1 1/2"
2 1/2"	L-150S: 1 1/2"
3" to 3 1/2"	L-175S: 1 3/4"

We also make a cylinder with a decorative turnlatch, L-7500 =  1", L-7525 = 1 1/4", L-7550 = 1 1/2", and L-7575 = 1 3/4".

If you have a double door, or would just like the extra bolt functionality on your single entry door, we suggest using the following door hardware:

ZB-90TL Turnlatch	ZB-90LK Lower Knob Only	M-1412 Surface Bolt	ZB-9SP

Double Door Plates
	Many of our door plates have matching double door plates to work with a double door configuration. This is very useful in places where one door needs to have a locking function - and the other door only needs a knob or handle. Complement your doors with a set of matching door plate pairs, from any of our vintage reproduction styles.